Microcut
Challenger BNC 2800

 
BY PHONE
(631) 249-5566
BY EMAIL
BY Web
 
Main Features:
  • Fanuc OITD CNC Control
  • Rigid geared headstock with automatic speed change.
  • High rigidity and precision of manufacturing
  • High efficiency output
  • Automatic lubrication system with meter valve for slide ways & ballscrews
  • Fine surface finish of machined work piece.
  • Box way guide ways offer 2 times of rapid feed
  • Fast spindle speed
Specifications:
Item Standard Metric
Swing in gap 38.18” 970mm
Swing over bed 27.77” 680mm
Swing over cross slide 9.44” 340mm
Max. cutting length 47.24”/86.61”/120.07”/159.44”/
196.85”/236.22”
1000/2200/3050/4050/
5050/6050mm
X axis travel 16.73” 425mm
Z axis travel 47.24”/82.67”/120.07”/159.44”/
198.81”/238.18”
1200/2100/3050/4050/
5050/6050mm
Rapid traverse (X & Z) 393.70”/min & 472.44”/min 10M/min & 12M/min
Spindle bore 6.02” 153mm
Spindle speed 15rpm-1480rpm 15rpm-1480rpm
Main power 20.11/29.50hp 15/22kw
* Specifications are subject to change without notice.
Standard Accessories:
  • Fanuc OITD CNC Control
  • 6.02" spindle bore
  • Main spindle motor
  • Gear head
  • Automatic speed changer
  • Chuck sliding guard with interlock device
  • Gap bed
  • Tailstock
  • Traveling front single door with interlock safety device
  • Coolant system
  • Lubrication system
  • Low voltage circuit system
  • Protable MPG
  • CE Norms
  • Leveling pads
  • Operation manual & parts list (in English)
  • Tool set & kits
Optional Accessories:
  • Fagor and Siemens Controls available
  • TB-200 V8/VDI50 turret, brand Baruffaldi
  • LS-200 8 station hyd. turret
  • Boring bar base/holder
  • TBMA-200 V8/VDI50 power turret, brand Baruffaldi
  • C axis
  • Rear chuck mounting preparation
  • Rear chuck guard
  • Manual 3-jaw chuck
  • Hyd. 3-jaw chuck
  • Automatic bar feeder
  • Roller steady rest 1.96"-11.81"
  • Roller steady rest 9.84"-14.96"
  • Hydraulic steady rest preparation
  • Follow rest .78"-7.78"
  • Hyd. tailstock quill
  • Rotating tailstock quill
  • Tailstock end cover with limit switch (for 39.37" – 157.48" length only)
  • Full enclosure guarding for 40"/80"/120"/160" length
  • Chip conveyor + wash down system
  • Air conditioner for electric cabinet
  • Heat exchanger for electric cabinet
  • EMC
  • Transformer for other than 220V
  • Tool holders
  • Fanuc 0iTC with 10.4" LCD display and manual guide
10 Industrial Highway, Lester, PA 19113 | Phone: (631) 249-5566 | sales@challengermachinetools.com
Copyright 2014 Challenger Machine Tools LLC. All Rights Reserved.