CNC Lathe
Specifications:
|
Item |
Standard |
Metric |
Swing in gap |
40.15” |
1020mm |
Swing over bed |
28.74” |
730mm |
Swing over cross slide |
15.35” |
390mm |
Max. cutting length |
39.37”/78.74”/118.11”/157.48”/ 196.85”/236.22” |
1000/2000/3000/4000/ 5000/6000mm |
X axis travel |
17.91” |
455mm |
Z axis travel |
47.24”/86.61”/125.98”/165.35”/ 204.72”/244.09” |
1200/2200/3200/4200/ 5200/6200mm |
Rapid traverse (X & Z) |
393.70”/min & 472.44”/min |
10M/min & 12M/min |
Spindle bore |
4.17”(std.)/6.02”, 9.05”, 10.00”, 13.97”(opt.) |
106mm(std.)/153, 230, 254, 355mm(opt.) |
Spindle speed |
15-1480rpm (4.17”/6.02”)/ 10-750rpm (9.05”/10.00”)/ 10-500rpm (13.97”) |
15-1480rpm (106/153mm)/ 10-750rpm (230/254mm)/ 10-500rpm (355mm) |
Main power |
29.50/44.25 hp |
22/33 kw |
|
* Specifications are subject to change without notice.
Standard Accessories:
- Fanuc OITD CNC Control
- 4.17" spindle bore
- Main spindle motor
- Automatic speed changer
- Chuck sliding guard with interlock device
- Gap bed
- Tailstock
- Traveling front single door with interlock safety device
- Coolant system
- Lubrication system
- Low voltage circuit system
- Protable MPG
- CE Norms
- Leveling pads
- Operation manual & parts list (in English)
- Tool set & kits
|
Optional Accessories:
- Fagor and Siemens Controls available
- Enlarged 6.02"/9.05"/10.00"/13.97" spindle bore
- TB-200 V8/VDI50 turret, brand Baruffaldi
- LS-200 8 station hyd. turret
- Hyd. 4 way tool post
- Boring bar base/holder
- TBMA-200 V8/VDI50 power turret, brand Baruffaldi
- C axis
- Rear chuck mounting preparation
- Rear chuck guard
- Manual 3-jaw chuck
- Hyd. 3-jaw chuck
- Automatic bar feeder
- Roller steady rest 1.96"-11.81"
- Roller steady rest 9.84"-16.53" for BNC-3000 series
- Roller steady rest 9.84"-19.68" for BNC-3500/4000 series
- Hydraulic steady rest preparation
- Follow rest .78"-7.87"
- Hyd. tailstock quill
- Rotating tailstock quill
- Tailstock end cover with limit switch (for 39.3"~157.48" length only)
- Full enclosure guarding for 40"/80"/120"/160" length.
- Chip conveyor + wash down system
- Air conditioner for electric cabinet
- Heat exchanger for electric cabinet
- EMC
- Transformer for other than 220V
- Tool holders
- Fanuc 0iTC with 10.4" LCD display and manual guide i
|
|