CNC Lathe
Specifications:
 |
| Item |
Standard |
Metric |
| Swing in gap |
50.23” |
1276mm |
| Swing over bed |
38.97” |
990mm |
| Swing over cross slide |
25.43” |
646mm |
| Max. cutting length |
39.37”/78.74”/118.11”/157.48”/
196.85”/236.22” |
1000/2000/3000/4000/
5000/6000mm |
| X axis travel |
17.91” |
455mm |
| Z axis travel |
47.24”/86.61”/125.98”/165.35”/
204.72”/244.09” |
1200/2200/3200/4200/
5200/6200mm |
| Rapid traverse (X & Z) |
393.70”/min & 472.44”/min |
10M/min & 12M/min |
| Spindle bore |
4.17” (std.)/6.02”, 9.05”, 10.00”,
13.97” (opt.) |
106mm (std.)/153mm, 230mm, 254mm,
355mm (opt.) |
| Spindle speed |
15-1480rpm (4.17”/6.02”)/
10-750rpm (9.05”/10.00”)/
10-500rpm (13.97”) |
15-1480rpm (106/153mm)/
10-750rpm(230mm/254mm)/
10-500rpm (355mm) |
| Main power |
29.50/44.25 hp |
22kw/30 kw |
|
* Specifications are subject to change without notice.
Standard Accessories:
- Fanuc OITD CNC Control
- 4.17" spindle bore
- Main spindle motor
- Automatic speed changer
- Chuck sliding guard with interlock device
- Gap bed
- Tailstock
- Traveling front single door with interlock safety device
- Coolant system
- Lubrication system
- Low voltage circuit system
- Protable MPG
- CE Norms
- Leveling pads
- Operation manual & parts list (in English)
- Tool set & kits
|
Optional Accessories:
- Fagor and Siemens Controls available
- Enlarged 6.02"/9.05"/10.00"/13.97" spindle bore
- TB-200 V8/VDI50 turret, brand Baruffaldi
- LS-200 8 station hyd. turret
- Hyd. 4 way tool post
- Boring bar base/holder
- TBMA-200 V8/VDI50 power turret, brand Baruffaldi
- C axis
- Rear chuck mounting preparation
- Rear chuck guard
- Manual 3-jaw chuck
- Hyd. 3-jaw chuck
- Automatic bar feeder
- Roller steady rest 1.96"-11.81"
- Roller steady rest 9.84"-16.53" for BNC-3000 series
- Roller steady rest 9.84"-19.68" for BNC-3500/4000 series
- Hydraulic steady rest preparation
- Follow rest .78"-7.87"
- Hyd. tailstock quill
- Rotating tailstock quill
- Tailstock end cover with limit switch (for 39.3"~157.48" length only)
- Full enclosure guarding for 40"/80"/120"/160" length
- Chip conveyor + wash down system
- Air conditioner for electric cabinet
- Heat exchanger for electric cabinet
- EMC
- Transformer for other than 220V
- Tool holders
- Fanuc 0iTC with 10.4" LCD display and manual guide i
|
|
